The WetLink Penetrator is a compression gland cable penetrator to seal electrical cables as they pass into a device or enclosure. Each set includes a bulkhead, seal, plug, O-ring, and nut. It’s rated to 950 meter (3,116 feet) water depth when used with tested cables. We recommend the WetLink Plug Wrench and WetLink Assembly Block to ease with assembly.
The Pressure Relief Valve (PRV) automatically releases any excess pressure built up inside a watertight enclosure. It works automatically, but it can also be opened manually or used to perform a vacuum test on your enclosure! We strongly recommend using the PRV on the locking watertight enclosures.
The WetLink Penetrator is a compression gland cable penetrator to seal electrical cables as they pass into a device or enclosure. Each set includes a bulkhead, seal, plug, O-ring, and nut. It’s rated to 950 meter (3,116 feet) water depth when used with tested cables. We recommend the WetLink Plug Wrench and WetLink Assembly Block to ease with assembly.
Tubes for the 2″, 3″, and 4″ Series Watertight Enclosures, available in a variety of lengths and in clear cast acrylic plastic and aluminum materials. These are the second generation of these tubes with precision machined O-ring interfaces, a locking cord, and anti-rotation feature. Rated to depths up to 950 meters.
This cable penetrator blank is provided with no hole. You can use it to seal an extra hole on a watertight enclosure! This blank features a hex socket for ease...
This kit provides the components needed to upgrade to the BlueROV2 Heavy Configuration with four vertical thrusters, 6 degree-of-freedom control, increased buoyancy, and external thruster guards. Requires the use of two additional penetrator holes on the main enclosure.
This hand-operated vacuum pump allows you to test the seals on a watertight enclosure without getting it wet. The vacuum test doesn’t test at very high pressure, but it does...
