The Pressure Relief Valve is an important safety mechanism for our locking watertight enclosures and also adds a few features to the enclosures.

Why is it needed for safety? Our watertight enclosures have come with a manual vent that has worked great for years. But, our next generation watertight enclosures have a locking cord that secures the flange to the tube and prevents the end cap from coming off.

In the rare situation that an excessive amount of pressure builds up in the tube it can create an unsafe situation and/or damage to the enclosure. Pressure build-up could be due to the buildup of gasses from a chemical reaction like something catching on fire, or from a slow leak into the enclosure while at depth followed by a quick return to the surface. The PRV automatically releases any excess pressure built up inside a watertight enclosure. It works automatically to relieve pressure, and it also works manually, like our original vent. 







BlueRobotics
Enclosures
Pressure Relief Valve - Marine Thinking
Pressure Relief Valve - Marine Thinking
Pressure Relief Valve - Marine Thinking
Pressure Relief Valve - Marine Thinking
  • SKU: BLUE-PRV-M10-ASM-R1

Pressure Relief Valve

$42.99
The Pressure Relief Valve (PRV) automatically releases any excess pressure built up inside a watertight enclosure. It works automatically, but it can also be opened manually or used to perform a vacuum test on your enclosure! We strongly recommend using the PRV on the locking watertight enclosures.

    The Pressure Relief Valve is an important safety mechanism for our locking watertight enclosures and also adds a few features to the enclosures.

    Why is it needed for safety? Our watertight enclosures have come with a manual vent that has worked great for years. But, our next generation watertight enclosures have a locking cord that secures the flange to the tube and prevents the end cap from coming off.

    In the rare situation that an excessive amount of pressure builds up in the tube it can create an unsafe situation and/or damage to the enclosure. Pressure build-up could be due to the buildup of gasses from a chemical reaction like something catching on fire, or from a slow leak into the enclosure while at depth followed by a quick return to the surface. The PRV automatically releases any excess pressure built up inside a watertight enclosure. It works automatically to relieve pressure, and it also works manually, like our original vent. 







    Parameter

    Value

    Performance

    Maximum Rated Depth (seawater)

    950 m

    3116 ft

    Design Lifetime¹

    3 years or 500 cycles to rated depth

    Temperature Rating (air)

    -25 to 60°C

    -13 to 140°F

    Temperature Rating (water)

    0 to 40°C

    32 to 104°F

    Pressure Release Rating

    0.8 ± 0.2 bar

    12 ± 3 psi

    Mean Flow Rate

    110 slpm @ 1.2 bar

    3.9 cfm @ 18 psi

    Tools

    Compatible Bulkhead Wrench

    WL-M10-BULKHEAD-WRENCH

    Recommended Installation Torque

    3.5 Nm

    Physical

    Recommended Through Hole Diameter

    10.2 mm

    Bulkhead Thread

    M10 x 1.5

    Bulkhead Thread Length

    20 mm

    Bulkhead/Nut Wrench Flats

    16 mm

    Overall Assembled Height From Endcap

    29.5 mm

    Overall Outer Diameter

    18 mm

    Bulkhead O-ring Size

    AS568-013 Buna-N 70A

    Plug O-ring Size

    1.5 x 11.5 mm Buna-N 70A

    Bulkhead/ Plug Material

    7075-T6 Anodized Aluminum

    Wetted Materials

    Buna-N Rubber
     Molykote 111 Compound
     7075-T6 Anodized Aluminum

    In Air Weight (No Nut)

    16 g

    In Water Weight (No Nut)

    9.8 g

    2D Drawings


    You Might Also Need

    Recently Viewed Products

    BACK TO TOP