This is the power cable set on the BlueROV2 that connects the battery enclosure to the main electronics enclosure. It has preinstalled WetLink Penetrators and 5.5 mm bullet connectors.

These cables use the same three-conductor cable as our thrusters and the 6.5mm version of the WetLink Penetrator that work with that cable. With three 16 AWG conductors for both positive and negative, this is equivalent to a single 11 AWG wire, providing ample copper for efficient power transmission. The cables include red and black heat-shrink to indicate polarity when installed.

This cable can be used as a replacement on your BlueROV2 and it’s a great option if you’re building an ROV from scratch as well 



BlueRobotics
Power
Battery Power Cable Set - Marine Thinking
Battery Power Cable Set - Marine Thinking
  • SKU: BLU-CAB-POWER-SET-R1-RP

Battery Power Cable Set

$95.98
Battery power cable set for the BlueROV2 with pre-installed WetLink Penetrators and 5.5 mm bullet connectors.

    This is the power cable set on the BlueROV2 that connects the battery enclosure to the main electronics enclosure. It has preinstalled WetLink Penetrators and 5.5 mm bullet connectors.

    These cables use the same three-conductor cable as our thrusters and the 6.5mm version of the WetLink Penetrator that work with that cable. With three 16 AWG conductors for both positive and negative, this is equivalent to a single 11 AWG wire, providing ample copper for efficient power transmission. The cables include red and black heat-shrink to indicate polarity when installed.

    This cable can be used as a replacement on your BlueROV2 and it’s a great option if you’re building an ROV from scratch as well 



     

    • 1 x Positive Power Cable
    • 1 x Negative Power Cable
    • 1 x Battery Plug
    • 4 x O-rings
    • 4 x Penetrator nuts


    Parameter

    Value

    Physical

    Cable Construction

    CAB-PUR-3-16AWG-R2

    Bullet Connectors

    5.5 mm Bullet

    Included Adapter

    5.5 mm bullets to XT90

    Overall Length

    489 +- 35 mm

    19.3 in +- 1.4 in

    Length Between Penetrators

    258 +- 15 mm

    10.2 in +- 0.6 in

    In Air Assembly Weight (cable pair)

    13.2 g

    0.47 oz

    Performance Characteristics

    Depth Rating

    950 m

    3116 ft

    Design Lifetime¹

    3 years or 500 cycles to rated depth

    Temperature Rating (air)²

    -25 to 60°C

    -13 to 140°F

    Temperature Rating (water)²

    -4 to 40°C

    32 to 104°F

    In Water Maximum Continuous Current³

    80A

    Tools

    Recommended Bulkhead Wrench

    WL-M10-BULKHEAD-WRENCH

    Torque Specifications

    Bulkhead-Endcap or Nut-Bulkhead

    3.5 nm

    You Might Also Need

    Recently Viewed Products

    BACK TO TOP