Free shipping in Canada over CAD 2000.
A simple electronic speed controller for the T100 and T200 Thrusters and M100 and M200 motors. It’s based on the BLHeli ESC design with upgraded features and performance!
An electronic speed controller (ESC) is necessary to run any three-phase brushless motor like Blue Robotics’ thrusters and motors. This 30 amp ESC is sufficient for the T100 and T200 thrusters and runs the BLHeli_S firmware.
- Simple, robust brushless electronic speed controller
- Compact form factor
- Forward/reverse rotation direction for forward/reverse thrust
- Customizable settings in an easy-to-use interface
- High-efficiency, low-heat design optimized for minimal cooling environments
|Voltage||7-26 volts (2-6S)|
|Max Current (Constant)||30 amps (depending on cooling)|
|Weight||16.3 g||0.036 lb|
|Power Connectors||Spade terminals for No. 6 screw|
|Motor Connectors||Tinned wire ends|
|Signal Connector||3-pin servo connector (0.1” pitch) (ground, blank, signal)|
|Pulse Width Signal|
|Signal Voltage||3.3-5 volts|
|Max Update Rate||400 Hz|
|Max forward||1900 microseconds|
|Max reverse||1100 microseconds|
|Signal Deadband||+/- 25 microseconds (centered around 1500 microseconds)|
- 1 x Basic ESC