When the end caps and flanges are installed on our watertight enclosures, the air inside is compressed a bit and tries to push the enclosure open. This vent allows you to quickly and easily release the pressure and then seal things back up. You can also use it to vacuum-check your enclosure, ensuring there’s no leaks. It’s based on our standard M10 threaded bulkhead design with an added “plug” that fits in to seal it. The plug is sealed with double O-rings and screws into the bulkhead.

Features



BlueRobotics
Connectors
M10 Enclosure Vent and Plug - Marine Thinking
M10 Enclosure Vent and Plug - Marine Thinking
M10 Enclosure Vent and Plug - Marine Thinking
  • SKU: BLUE-VENT-M10-R1-RP

M10 Enclosure Vent and Plug

$12.69
This vent allows trapped pressure to escape from an enclosure after it has been closed. It includes a threaded plug with a double O-ring seal to open and close the vent.

    When the end caps and flanges are installed on our watertight enclosures, the air inside is compressed a bit and tries to push the enclosure open. This vent allows you to quickly and easily release the pressure and then seal things back up. You can also use it to vacuum-check your enclosure, ensuring there’s no leaks. It’s based on our standard M10 threaded bulkhead design with an added “plug” that fits in to seal it. The plug is sealed with double O-rings and screws into the bulkhead.

    Features

    • Anodized aluminum construction for corrosion resistance and high strength
    • O-ring seal that works on any smooth surface
    • Threaded plug can be tightly secured



    • 1 x Vent Bulkhead
    • 1 x Vent Plug
    • 1 x M10 Nut
    • 1 x O-ring for Bulkhead
    • 2 x O-ring for Vent Plug


    Parameter

    Value

    Performance

    Maximum Rated Depth (seawater)

    950 m

    3116 ft

    Design Lifetime¹

    3 years or 500 cycles to rated depth

    Temperature Rating (air)

    -25 to 60°C

    -13 to 140°F

    Temperature Rating (water)

    0 to 40°C

    32 to 104°F

    Tools

    Compatible Bulkhead Wrench

    WL-M10-BULKHEAD-WRENCH

    Recommended Installation Torque

    3.5 Nm

    Physical

    Recommended Through Hole Diameter

    10.2 mm

    Bulkhead Thread

    M10 x 1.5

    Bulkhead Thread Length

    20 mm

    Bulkhead/Nut Wrench Flats

    16 mm

    Overall Assembled Height From Endcap

    25 mm

    Overall Outer Diameter

    18 mm

    Bulkhead O-ring Size

    AS568-013 Buna-N 70A

    Plug O-ring Size

    1.5 x 11.5 mm Buna-N 70A

    Bulkhead/ Plug Material

    7075-T6 Anodized Aluminum

    Wetted Materials

    Buna-N Rubber
     Molykote 111 Compound
     7075-T6 Anodized Aluminum

    In Air Weight (No Nut)

    14.3 g

    In Water Weight (No Nut)

    8.5 g


    2D Drawings



    You Might Also Need

    Recently Viewed Products

    BACK TO TOP