This cable penetrator blank is provided with no hole. You can use it to seal an extra hole on a watertight enclosure! This blank features a hex socket for ease of installation!

The WetLink Penetrator (WLP) is our patent-pending, next-generation solution for low-cost, high pressure, high reliability sealing of electrical cables as they pass into enclosures or other devices. It’s rated to a depth of 950 meters (3,116 feet) and compared to subsea connectors or penetrators, the WetLink Penetrator is a fraction of the cost while offering validated reliability that you can count on.




BlueRobotics
Connectors
WetLink Penetrator Blank (No Hole) - Marine Thinking
WetLink Penetrator Blank (No Hole) - Marine Thinking
  • SKU:

WetLink Penetrator Blank (No Hole)

$7.09

    This cable penetrator blank is provided with no hole. You can use it to seal an extra hole on a watertight enclosure! This blank features a hex socket for ease of installation!

    The WetLink Penetrator (WLP) is our patent-pending, next-generation solution for low-cost, high pressure, high reliability sealing of electrical cables as they pass into enclosures or other devices. It’s rated to a depth of 950 meters (3,116 feet) and compared to subsea connectors or penetrators, the WetLink Penetrator is a fraction of the cost while offering validated reliability that you can count on.




    For each unit, the following items are included for the selected cable diameter size and bulkhead size

    • 1 x WLP Blank Bulkhead
    • 1 x WLP Nut
    • 1 x O-Ring



    Parameter

    M06 Thread

    M10 Thread

    M14 Thread

    SKU

    WL-M06-BLANK-R1-RP

    WL-M10-BLANK-R1-RP

    WL-M14-BLANK-R1-RP

    Performance Characteristics

    Maximum Rated Depth (seawater)

    950 m / 3116 ft

    Design Lifetime¹

    3 years or 500 cycles to rated depth

    Temperature Rating (air)²

    -25 to 60°C / -13 to 140°F

    Temperature Rating (water)²

    -4 to 40°C / 32 to 104°F

    Tools

    Compatible Bulkhead Wrench

    WL-M06-BULKHEAD-WRENCH

    WL-M10-BULKHEAD-WRENCH

    WL-M14-BULKHEAD-WRENCH

    Physical

    Bulkhead Thread Size

    M6

    M10

    M14

    Bulkhead Thread Pitch

    1 mm

    1.5 mm

    1.5 mm

    Bulkhead/Nut Wrench Flats

    12 mm

    16 mm

    20 mm

    Hex Key

    3 mm

    6 mm

    6 mm

    O-ring Size

    1.5 x 7 mm Buna-N 70A

    AS568-013 Buna-N 70A

    1.5 x 15 mm Buna-N 70A

    Overall Assembled Height from Endcap

    6 mm

    8 mm

    8 mm

    Overall Thread Length

    10 mm

    20 mm

    25 mm

    Overall Outer Diameter

    13 mm

    18 mm

    22 mm

    Recommended Through Hole Size

    6.2 mm

    10.2 mm

    14.2 mm

    Bulkhead Material

    7075-T6 Aluminum

    In Air Weight (no nut)

    2.3 g

    6.6 g

    11.8 g

    In Water Weight (no nut)

    1.5 g

    4.2 g

    9.3 g

    Recommended Installation Torque (bulkhead or nut)

    1 Nm

    3.5 Nm

    3.5 Nm

    ¹ Design life was used to inform testing in an accelerated environment, does not reflect warranty period.
    ² Sustained high temperatures can lead to performance loss over long periods of time.

    You Might Also Need

    Recently Viewed Products

    BACK TO TOP